XOL Toolhead Fastener Kit
The Xol Toolhead is the evolution of ‘Mantis Xol 2’ (https://github.com/Armchair-Engineering/Mantis-Xol). Aimed at modularity and quality of life improvements for installation and serviceability.
They have left the Mantis carriage behind, and thus are now just Xol sans Mantis. Don’t worry, it’s still a bit ugly. They wouldn’t fix that.
The Xol Toolhead Fastener kit contains all the hardware needed to build the toolhe3ad based on the BOM published here. If you also need fans, blowers and buck converter, please have a look at this kit.
Content:
- 10x M3 Heatset Insert (M3xD5.0xL4.0)
- 15x M3 x 8mm SHCS
- 10x M3 Hex Nut
- 2x M3 DIN9021 flat washer
- 2x M3 x 30mm Pin (stainless steel)
- 2x 1.8mm wide cable tie
- 2x M3 x 20mm Metal Stand-off
- 2x M3 x 20mm SHCS
- 6x M3 x 16mm SHCS
- 4x M3 x 6mm BHCS
- 4x M2.5 x 16mm SHCS
- 12x M2.5 x 8mm SHCS
- 1x Short PTFE tube (10cm, 4mm OD)
- 2x M2 x 10mm self tapping screw
